12V LED Driver, 12W, Non-Dimmable, Hardwire, 100–240V Input, 12V DC Output (Damp Rated) — DR-12V-12W

At a glance
A simple hardwired 12V driver for powering low-voltage LED gear. No dimming - just converts line voltage to 12V DC for strips, modules, undercabinet lights, and other 12V products.

You need this if

• You’re powering 12V LED strips/modules/undercabinet lights

• You want a hardwired (line-voltage) driver

• You don’t need dimming — just on/off

• You need something suitable for damp locations

• You want broad input compatibility (100–240V AC)

You don’t need this if

• You need dimming (this is non-dimmable)

• Your system is 24V (this is 12V only)

• Your load is over 12W (go up to a higher wattage driver)

Tech Specs

• Type: 12V hardwired LED driver (non-dimmable)

• Input Voltage: 100–240V AC

• Output Voltage: 12V DC

• Rated Power: 12W

• Output Current: 1.0A

• Nominal Input Current: 0.35A

• Efficiency: ~85% 

• Dimming: Non-dimmable (on/off only)

• Location Rating: Damp

• Surge Protection: L–N: 2 kV

• Operating Temp: -22°F to 158°F

• Material: Polycarbonate

• Finish/Colour: Grey

• Dimensions (L×W×H): 3-9/16" × 1-9/16" × 1-1/8"

• Weight: 2.4 oz

• Power cord length: 5"

• Certifications: cRUus CE & RoHS

• Warranty: 2 years

Compatibility notes 

• Match total load to 12W max (ideally keep it under ~10W for headroom).

• This is not a dimming driver